LIANG SIU IRON WORKS
LS-12.5AT 12.5[15]HP MILLING HEAD
Spindle motor 3 phase 4 positive :9.4KW , 12.5HP (11KW , 15HP)
Taper of spindle nose:N.T. No.50
Diameter of spindle nose :128.57 mm
Steps of spindle speeds :6 section
Standard spindle speeds type RPM.:
4P
50 c/s 92, 143, 193, 298, 385, 593
60 c/s 112, 170, 232, 357, 463, 713
Max diameter of cutter :200 mm
Rapid travel AC motor :0.375kw , ½ HP , 1/30 ratio
Work travel :600 mm
Reversal slide :0.5 mm/rev
Weight :650 Kgs
LIANG SIU IRON WORKS  
No.125, Zhongshan Rd., Houli Shiang, Taichung County 421, Taiwan (R.O.C.)  
Tel: +886-4-25560638, +886-4-25565393
Fax: +886-4-25588913

HOME